HM130 WOODLANDER XL

HM130 WOODLANDER XL

The HM130 Woodlander XL unites our mighty HM130 sawmill with the extended length Woodland Mills Woodlander trailer to offer sawyers the perfect balance between power and mobility. The quick connect trailer is rugged enough to handle rough terrains yet capable of highway travel. With the powerful and reliable 14 HP Kohler gas/petrol engine and the ability to mill logs up to 30” (76cm) in diameter and 16’ 11″ (5.1m) in length, the HM130 Woodlander XL is the perfect combination for sawyers who require big log milling capabilities, yet a highly mobile milling operation.


$10,199.00

Build & Price

2 Year Warranty

Same Price Policy

HM130 Woodlander XL Image 1HM130 Woodlander XL Image 2HM130 Woodlander XL Image 3HM130 Woodlander XL Image 4

 

Product Description

All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn and well-located hand crank system. The blade is kept lubricated by utilizing a water drip system to prevent sap from gumming up your blade.
HM130 Woodlander XL Product Description


Cutting

The mill is capable of cutting 30″ (76cm) diameter logs up to 16′ 11″ (5.1m) long. Capable of squaring cants at 22″ (55cm) or skimming veneers at as thin as 1/16″ (1.6mm). The HM130 Woodlander XL will cut within 1″ (25mm) of the deck ensuring you maximize your usable board foot output.
HM130 Woodlander XL Cutting


Power

The HM130 Woodlander XL sawmill is powered by a 14 HP 4-cycle Kohler gas/petrol engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty. Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease. Official Kohler CH440 Engine Site.
HM130 Woodlander XL Power


Track System

The head of our machine rolls along rigid 2.5″ x 4″ (63mm x 101mm) galvanized “L” channel which is cross supported with heavy duty 3″ x 6″ (76mm x 152mm) rectangle channels. These cross supports ensure the weight of the log is dispersed over a large bearing surface to avoid marking the log with indentations. These heavy duty cross supports also provide additional rigidity to the track system. The track also features a simple adjustable log support to securely hold the log while milling. The track allows for 16’11” (5.1m) log lengths. The track system is mated to the trailer package which features 1/4” (6mm) thick laser cut and bent side plates and tubular cross supports making the two work together to create an extremely rigid chassis.
HM130 Woodlander XL Track System


Blades

The HM130 utilizes standard 1.25″ x 144″ x .042″ (32mm x 3658mm x 1mm) Lenox Woodmaster C Sharp hardened tipped blades which are available through Woodland Mills. Blade kerf is kept to a minimum at just .080″ (2mm) to maximize the most amount of lumber per log.
HM130 Woodlander XL Blades


Warranty

The sawmill is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (tires, belts, blades & bearings). The Kohler engine is covered by a 3 year commercial warranty which is honoured through any Kohler small engine dealer.
HM130 Woodlander XL Warranty


Specification

Power

14HP Kohler Pro Command (Gas/Petrol)

Log Diameter Capacity

30" (76cm)

Log Length Capacity

16'11" (5.1m)

Distance Between Blade Guides

22" (56cm)

Maximum Cut Depth

7" (18cm)

Last Cut Off Deck

1" (2.5cm)

Maximum Cut Width

21" (53cm) Square Cant or 22" (55cm) Live Edge

Last Cut Off Deck

1" (2.5cm)

Track Rail Construction

2.5" x 4" (63mm x 100mm) Galvanized Steel Rails

Track Log Bunks (Rectangle Tube Steel)

3" x 6" (75mm x 150mm) Powder Coated

Stainless Steel Log Bunk Covers

Optional

Leveling Feet

Set of 12 Included

Log Clamps

1 Quick Lock Style

Head Design

2"x2" (50mm x 50mm) 4 Post

Bandwheel Diameter

19" (48cm)

Blade Size

Lenox 1.25" Width x 144" Length x 7/8" Pitch (32mm x 3658mm x 22mm)

Blade Engagement System

Centrifugal Clutch (Gas & Go)

Lubricant Tank

2.6 Gallon / 10 Litre Aluminium

Trailer Axle

Torsion Axle Design

Trailer Wheels

5 Bolt on 4.5" (114mm) & 195/60/14 Tires.

Trailer Lights

LED light kit (stop, turn, tail, side markers and licence plate light)

Trailer Levelling Jacks

6 Included

Trailer Ball Coupler

2" (50mm)

Finish

Powder Coat Paint / Galvanized Steel

Sawmill Warranty

2 Year Parts Warranty

Engine Warranty

3 Year Warranty (Offered directly through Kohler)

Shipping Weight

1801 lbs (817 kg)

HM130 Portable Sawmill

$6,899.00 GST Included (Freight Extra)Add to Cart

HM130 Woodlander

$8,699.00 GST Included (Freight Extra)Add to Cart

Bandsaw Blade Sharpener

$979.00 GST Included (Freight Extra)Add to Cart

HM130 Track Extension

$519.00 GST Included (Freight Extra)Add to Cart

4’ (1.2m) Cant Hook

$179.00 GST Included (Freight Extra)Add to Cart

Blade Sharpener Grinding Disc

$34.00 GST Included (Freight Extra)Add to Cart

Sawmill Cover – Custom Fitted

$229.00 GST Included (Freight Extra)Add to Cart

HM126 & HM130 Sawmill Spare Parts Kit

$229.00 GST Included (Freight Extra)Add to Cart

HM126 & HM130 Blades (Pack of 10)

$339.00 GST Included (Freight Extra)Add to Cart

HM126 & HM130 Bi-metal Blade

$99.00 GST Included (Freight Extra)Add to Cart

Shipping Information

* Stocked items are delivered to your door within 2 to 11 business days. Tailgate service provided to most areas.

Shipping Weight: 1801 lbs (817 kg)

Approximate Delivery Times

Some residential deliveries may require additional days of service. Please call for shipping quote and delivery times for territories and remote locations.


HM130 Woodlander XL Reviews


JOIN OUR NEWSLETTER!